The new BMW G30 5 Series was released earlier this Spring and has, once again, proved to be one of the most technically advanced, comfortable and performance oriented luxury sedans. Now, KW Suspension is further improving upon the handling aspect of the vehicle, thanks to the introduction of the KW Suspension Variante 3 coilovers for the BMW G30 5 Series platform.
Made out of stainless steel, this allows KW Suspension Variant 3 coliovers to continuous lower the vehicle from 35mm all the way up to 55 mm, thus increasing the dynamic and sporty driving behavior of the vehicle. Due to the independent compression and rebound setting options, the suspension can be adjusted individually for handling, driving comfort, and sportiness.
For the Variant 3 suspension technology, KW uses a set of pre-set high speed compression valves: “This enables when driving over ground shafts or large cross-joints, even at the maximum lowering of the BMW that the valves are opened and the suspension absorbs it effortlessly. This means the sedan cannot pitch in such driving situations, it remains drivable and stable, eliminating a sudden shockwave through the chassis of vehicle,” Johannes Wacker explains the unique features of the stainless steel KW coilovers. “With our Variant 3, the new BMW 5-series can be driven sporty and comfortable.”
In its history, KW automotive has developed a number of suspension setups for numerous BMW models. The company also heavilly cooperates with the Munich automotive manufacturer on various special models and motor sport projects. For example, for the official BMW customer Motorsport program, KW provides dampers that are independently adjustable in compression and rebound damping for the BMW M235i Racing. Drivers of the new BMW 5-series (G30) can also benefit from this cooperation.
The KW Variant 3 coilover kit is now available for the sedan, where the dampers can be adjusted manually, just like the suspensions for the M235i Racing: “So drivers have the opportunity to adjust an individual driving behavior according to their ideas”, explains KW Product Manager Johannes Wacker. “Many drivers like to use sporty light-alloy rims, which are not offered by BMW, and with the adjustable dampers of the Variant 3”
Additionally, for many aftermarket tuning savvy drivers, with the the adjustable dampers of the Variant 3 coilovers, they can now take into account the different wheel/tire combinations in regards to driving dynamics and driving comfort. The rebound stage can be set either stiffer or softer with 16 exact clicks via the rebound adjuster at the upper end of the piston rod. With a lower rebound force, the comfort is increased, while at a higher rebound force, the handling is further increased and the body vibrations are reduced. So even at very high speeds, the steering precision is noticeably improved. Independently, the patented KW multi-way valve can be adjusted at the low speed compression level, which in combination with the suspension spring also has an influence on the immersion speed of the piston rod. Via the integrated click wheel located directly on the stainless steel housing, the damping force can be adjusted in twelve clicks separately from the rebound, so that hardly any pitch and roll movements occur even in extremely demanding driving maneuvers. In addition, a higher compression stage on the front axle supports an even more direct steering and on the rear axle it counteracts the oversteering.
Take a look at the complete media gallery of the KW Suspension Variant 3 coilover system for the G30 5 Series right below.
The article KW Suspension Reveals Variant 3 Coilovers for the new BMW G30 5 Series appeared first on BMW BLOG
from BMW BLOG http://ift.tt/2vD3YH0